l Cost-saving. It is a DUCTLESS fume hood with air face velocity controlled at 0.5m/s. For those laboratories with a need for adding a fume hood but without a reserved ventilation pipes, this ductless fume hood is undoubtedly the best choice.
l Environmentally friendly & energy saving. It’s equipped with an advanced filtration system. With the help of the Fan, the polluted air will go through the filter where toxic chemicals would be purified, becoming clean and safety air back to the laboratory. Compared to traditional duct fume hood, it will not consume any expensive air-conditioning wind, and also the polluted air will not be directly exhausted to the outside, harming ambient environment and people.
l Easy to be installed.The modular design of the fume hood itself allows for being assembled within one hour.
l Conformance:
GB/T 13554-2008
AFNOR NFX 15-211:2009
ANSI/ASHRAE 110-1995-EN 14-175
JG/T 385-2012
ISO 9001-2008
Technical parameters
External size(W*D*H) | 1000*800*1350mm | External voltage | AC 100~240V |
Air handling capacity | ≥460m3/h | Internal voltage | DC 24V |
Air face velocity | 0.5±0.1m/s | Amperage | 2.15~3.45 A |
Noise | < 52 dbA | Frequency | 50~60Hz |
Type of operating hole | Trapezoid | Power | 52~86W |
Standard accessories
Air face velocity monitor | 1 |
Filter | 2 |
Fan | 2 |
Fan shroud | 2 |
Saturation sampling port | 1 |
Waterproof fluorescent lamp | 1 |
Microcomputer control system | 1 |
Fan failure alarm system | 1 |
Overheat alarm system | 1 |
Power wire | 1 |
Optional accessories
Worktop (L*W*H: 984*780*25mm) | Phenolic resin worktop |
Epoxy resin worktop |
Ceramic worktop |
Stainless steel worktop |
Tempered worktop |
base | Fixed base (L*W*H: 1000*850*755-820) |
Movable base (L*W*H: 1000*850*870mm) |
Optional filter models
Activated carbon filter | For organic gas and solvents |
Acid filter | For inorganic acid |
Formaldehyde filter | For formaldehyde |
Ammonia filter | For ammonia |
Mercury filter | For mercury |
Radioiodine filter | For radioiodine |
HEPA 14 particle filter | For powder and particle |
Details show
Air face velocity monitor
Advanced electronic control system
Waterproof fluorescent lamp
Company Information
Shanghai Guange Industry Co., Ltd
Company profile
Shanghai Guange Industry Co., Ltd is founded in 2003 with registered fund 5 million yuan and has successfully passed the ISO9001, ISO14001 certification. It covers an area of about 6,800 square kilometers in Shanghai. Comprised of scientific research institute, manufacture factory and sales department, Guange is rising up rapidly from the peer group and gradually grew up to be the leader in laboratory furniture industry within merely 10 years by exclusive manufacture technic and elite staff.
Salesman: Will Yan
Business consulting: 0086 21 52368597
Factory address: No.9 Caolian Rd, Jiading District, Shanghai, China.
Tel: 086-0215236 8597
Fax: 086-021-6992 0991
Website: ://www.guange-equip.com/